Blindness- A heart Touching Story

There was a blind girl who hated herself because she was blind. She hated everyone, except her loving boyfriend 
who was always there for her. She told her boyfriend, 'If I could only see the World, I will marry you.'

One day, someone donated a pair of eyes to her. When the bandages came off, she was able to see everything, including
 her boyfriend.

He asked her,'Now that you can see the world, will you marry Me?' The girl looked at her boyfriend and saw
 that he was blind.

The sight of his closed eyelids shocked her. She hadn't expected that, and the thought of looking at them
 the rest of her life led Her to refuse to marry him.

Her boyfriend left in tears and days later wrote a note to her that said:

'Take good care of your eyes, my dear, for before they Were yours, they were mine.'

Speeding up your internet connection under Linux and Windows

This summary is not available. Please click here to view the post.

Improve your dialup modem preformance

You can't assume that just because you connected at a speed like 48.3KBps that you will stay there. Today's modems automatically fall back to a lower speed if the line noise is too high to maintain a faster connection, but sometimes they fall back too soon or too far.

Here's how to do it:


Click Start the button.
Select Settings.
Click Control Panel.
Double-click on the Modems icon.
Select your modem.
Click the Properties button.
Click the Connections tab.
Click the Advanced button.
In the "Extra settings" field, type S36=7
Click OK to save your settings.


This will force your modem to try to stay connected at high speeds in two different ways before dropping back to an asynchronous mode with auto speed buffering.

Improve Doom 3's Performances!!, simple but efficient trick for every1

"The Catalyst 4.9 beta drivers are a sneak peak into future drivers that ATI is continuously working on. They were released mainly for the OpenGL component update, targeting improved Doom3 performance. Having said that, newer generations of hardware will get the most benefit from this driver (X800* series). While I haven't done specific benchmarks, X800 users can see performance increase of 5~30%, depending on the level and the system/hardware type. Regretfully, older hardware, such as 9700's and even 9800's will not get as much benefit. And if paired with a slower system (or with less memory) might see +/- performance improvements."[/size]

Source: www.Teamradeon.com

There is a boost, but don't expect miracles. With that said, give this a read:

As all of you who already have this game recognized the game is very slow even on new Computers.

I found out the reason for this and the solution to fix this problem.

As you already know after installation the game consits only of the doom3.exe and some .PK4 files. Those PK4 files includes the entire game (sounds, videos, textures etc.) in high compressed form.

Normally those files were decompresse during the game.

But this exactly is the problem. Even new CPUs are not able to decompress those files while running the game with good peformance and therfore the game runs very **** also on new computers. I don't know if the develpers of
ID-Soft was just too stupid to think about this or if they have an agreement with some hardware manufacturing firms.

How to get around this problem:

It is very simple. Go to your Doom 3 installation directoy and get inside the folder "Base". There are some .PK4 files you have to open each of them with WinRAR 3.3 and extract their entire contents to the Base dir in you Doom 3 installation folder (replace all files if they are any duplicates). Now you have to delete all .PK4 files in the Base folder to prevent the game to use those compressed files again.

Now the game starts and runs much faster!!!

Have fun playing Doom 3!!!

It supposedly gives a small performance boost and improves some load times.

This is a guarenteed way to get a MASSIVE performance increase to your game, at the expense of taking up a little ore hard drive space (2 gigs approx). I went from running low quality at 800x600 to running High Quality on 1024x768. This improves load times AND framerate/details.

There is a catch! By doing this, you temporarily can't connect to pure multiplayer servers. You have been warned (I'll tell you how to revert it at the end)

After installation, the Doom III Folder consists only of the doom3.exe and some .PK4 files. Those PK4 files includes the entire game (sounds, videos, textures etc.) compressed. They are normally uncompressed in mid game, which is very hard on your CPU. Lets fix this!

1. Make a copy of ALL the files in C:\Program Files\Doom 3\base. This is some big filage, but if you want to revert to MP without reinstalling you need to do it.

2. Unrar the following .pk4 files (just pretend they are .rar's and open them with winrar) into the C:\Program Files\Doom 3\base folder (each one should unrar a single folder such as textures or models):

pak000.pk4
pak001.pk4
pak002.pk4
pak003.pk4
pak004.pk4 (This one has many files, put them all in \Base and over right any that apply.

3. Now delete the files above (pak000-004) or move them to another folder for storage so you can revert to multiplayer.

When you want to revert to multiplayer, restore everything you had before and get rid of the new stuff. I'm not sure if the folder "maps" is the same or not, so make sure you back that up.

When in normal mode, you should have "maps" "savegames" "config.spec" "doomConfig.cfg" "doomkey" "game00.pk4" and "gamex86.dll", nothing else. ALSO! If you open DoomConfig.cfg (C:\programfiles\doom3\base) in notepad and change

seta image_cacheMegs "32"

to a higher number, such as 96 or 128 you will see a big increase too. Go for it bad boys!"


keep informed if one of you manages to test sometime today.

Other stuff I found:

http://www.ocfaq.com/softmod/bios.php

BIOS to flash your ATI's cards

http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2149&p=3

explanation on how to run the DOOM 3 benchmark demo

How To Speed Up Http Requests On Internet Explorer

How to speed Up HTTP Requests On Internet Explorer

To comply with current Internet standards, Internet Explorer limits the number of simultaneous downloads to two downloads, plus one queued download. This configuration is a function of the browser. However, as connection speeds increase, and the number of total connections that are allowed to Internet servers increase, the two-connection limit may be restrictive.

Please Note: Changing the maximum number of connections beyond two is a violation of Internet standards; use at your own risk!

To increase the number of simultaneous connections that are allowed, follow these steps:

1. Start the Registry Editor
2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings
3. Select New > DWORD Value from the Edit menu
4. Name the new value MaxConnectionsPer1_0Server
5. Right-click the MaxConnectionsPer1_0Server value and choose Modify
6. Under Base, click the radio button next to Decimal
7. In the Value Data: box enter the number of simultaneous connections you want to set (for example 10 is a good value), and 8. click OK
9. Repeat steps 3 - 7 using the new value MaxConnectionsPerServer
10. Exit the registry editor

Visit



http://blogs.msdn.com/nickmac/archive/2004/08/25/220001.aspx

Secret Backdoor To Many Websites

Ever experienced this? You ask Google to look something up; the engine returns with a number of finds, but if you try to open the ones with the most promising content, you are confronted with a registration page instead, and the stuff you were looking for will not be revealed to you unless you agree to a credit card transaction first....
The lesson you should have learned here is: Obviously Google can go where you can't.

Can we solve this problem? Yes, we can. We merely have to convince the site we want to enter, that WE ARE GOOGLE.
In fact, many sites that force users to register or even pay in order to search and use their content, leave a backdoor open for the Googlebot, because a prominent presence in Google searches is known to generate sales leads, site hits and exposure.
Examples of such sites are Windows Magazine, .Net Magazine, Nature, and many, many newspapers around the globe.
How then, can you disguise yourself as a Googlebot? Quite simple: by changing your browser's User Agent. Copy the following code segment and paste it into a fresh notepad file. Save it as Useragent.reg and merge it into your registry.

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
@="Googlebot/2.1"
"Compatible"="+http://www.googlebot.com/bot.html"

Voila! You're done!

You may always change it back again.... I know only one site that uses you User Agent to establish your eligability to use its services, and that's the Windows Update site...
To restore the IE6 User Agent, save the following code to NormalAgent.reg and merge with your registry:

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
@="Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)"

Ps:
Opera allows for on-the-fly switching of User Agents through its "Browser Identification" function, while for Mozilla/FireFox browsers a switching utility is available as an installable extension from this url:
help://chrispederick.myacen.com/work/firefox/useragentswitcher/download/

Search For Ebook Server With Google.com

As you know Google.com is the most popular search engine in the world.

Here are some tips to helps you find eBooks with Google:

Find Apache's (default) Index page

Try this query:


+("index of") +("/ebooks"|"/book") +(chm|pdf|zip|rar) +apache




Find a particular eBook file

Try this query:



allinurl: +(rar|chm|zip|pdf|tgz) TheTitle

Rapidshare hack!!!!! Free premium acount for all

Rapidshare hack!!!!! Free premium acount for all

hi i got the encrypted message if you decode that message you get a link to register premium acount on rappit share but i dont have a decomipler for PKCS7 help me decode this message and we have all free premium acounts.

Code:

Rapidshare Hacked, unlimited upload, no countdown

Rapidshare Hacked, unlimited upload, no countdown

UNLIMITED download/upload
Its very easy to fool Rapid Share server if your IP address is assigned by your ISP. Just follow these simple steps:

clean up IE or netscape or Firefox cookie( In this case the one that belong to rapidshare website)
On Command prompt (open MS-DOS)
type -----> ipconfig /flushdns <---Enter
type -----> ipconfig /release <---Enter
type -----> ipconfig /renew <---Enter
type -----> exit <--------Enter

Or save these commands in a bat file and run it everytime you need to fool Rapidshare server. Remember to clean up rapidshare cookie in your temp Internet files folder.

Now you should be ready to download/upload as many files as you want from their server.

another way, get proxies from the internet and apply to the browser.
some of proxies might not work though...

Note:
If you are on a LAN and behind a router (using NAT, for example)---this will not work.
If you use a fixed proxy--- this will not work.
If you have a fixed IP address from your ISP or college or employer or whatever -- this will not work.
If you happen to get the same IP address from your DHCP server because it's assigned to you -- this will not work

NO waiting
THIS "cheat" for RAPIDSHARE DOWNLOADS eliminates the "WAITING" for the file. No more COUNTDOWNS. So heres what you do:

1. First, Find a rapidshare download.
2. Hit the FREE BUTTON, like always.
3. While your waiting for it to countdown, change the URL in the bar to:
Code:
java script:c(countdown = 0);
and hit ENTER or the GO button over and over. Eachtime you do so, it decreases 10-20 seconds. Few times and the link appears.
or you can simply do the code below ONCE
java script: for (i=0; i<30; i++) { c(); }

Quick Shutdown for XP, How to create a shutdown shortcut.

Ever want a quicker way to shutdown XP without navigating through the start menu, or using a third party shutdown utility Here is a script that will do just that.

Right click the desktop and choose New Shortcut. Copy and paste this script or type it in.

%windir%System32shutdown.exe -s -t 0

Choose Next and name it whatever you like. I name mine OFF. Click Finished. Right click and choose properties and pick a Icon for it if you'd like. I use a wall light switch Icon. I drag mine into my QuickLaunch toolbar for one click shutdown.

Enjoy!

Partitioning Your Harddisk With Fdisk

Partitioning Your Harddisk With Fdisk
Partitioning your HardDisk

Partitioning involves creating logical units on your hard drive that are then addressed as different drive letters. Not only does it help to organize your data (program files on one drive, games on another, documents on another) but also to speed up your PC. This is so because the drive head has to move a lesser distance for accessing data within one partition. You can also have different filesystems and OSs on the same hard drive.

Partitioning can be done using ‘fdisk’ in DOS/Windows 9x or ‘disk management’ in Windows 2000/ NT/XP. We will describe the procedure for fdisk, since disk management is GUI driven and the basics otherwise remain the same. While several other commercial packages like Partition Magic are available, these utilities (fdisk, computer management) are bundled with their respective OSs. You need a bootable floppy with fdisk.exe, format.com, and sys. com utilities. Before starting, decide how many partitions you want to create and their sizes. You can create one primary and one extended partition using the DOS fdisk. The extended partition can then have multiple logical partitions. Boot your machine using the bootable disk, and do the following.

Run fdisk. The utility will show you a numbered menu from where you can create, view, or delete partitions
The utility first asks you whether you want to enable large disk support. Type Y (for yes) and press enter if your hard-drive capacity is more than 4 GB. Large disk support creates a FAT32 partition, which can be greater than 2 GB
Select the first option from fdisk menu to create a primary partition. Specify the partition size in megabytes or percentage size when prompted for it
Similarly, create an extended partition. Extended partitions by themselves do not appear as drive letters. Instead, logical partitions must be created in them, which are then assigned drive letters
Exit fdisk and reboot the computer
Fdisk automatically assigns drive letters to all the partitions. You’ll need to format each partition in order to use it. Use format.com for the same
Your hard drive is now ready for taking an OS.

Optimize Broadband & Dsl Connections

These settings allow you to boost the speed of your broadband Internet connection when using a Cable Modem or DSL Router with Windows 2000 and Windows XP.

Open your registry and find the key below.

Create the following DWORD values, as most of these values will not already exist you will need to create them by clicking on 'Edit -> New -> DWORD Value' and then set the value as shown below.

DefaultTTL = "80" hex (or 128 decimal)
Specifies the default time to live (TTL) for TCP/IP packets. The default is 32.

EnablePMTUBHDetect = "0"
Specifies whether the stack will attempt to detect Maximum Transmission Unit (MTU) routers that do not send back ICMP fragmentation-needed messages. The default is 0.

EnablePMTUDiscovery = "1"
Specifies whether the TCP/IP stack will attempt to perform path MTU discovery as specified in RFC 1191. The default is 1.

GlobalMaxTcpWindowSize = "7FFF" hex (or 32767 decimal)
Specifies the system maximum receive window size advertised by the TCP/IP stack.

TcpMaxDupAcks = "2"
Determines the number of duplicate ACKs that must be received for the same sequence number of sent data before "fast retransmit" is triggered.

SackOpts = "1"
Enables support for selective acknowledgements as documented by Request for Comment (RFC) 2018. Default is 0.

Tcp1323Opts = "1"
Controls RFC 1323 time stamps and window scaling options. Possible values are: "0" = disable RFC 1323 options, "1" = window scale enabled only, "2" = time stamps enabled only and "3" = both options enabled.

TcpWindowSize = "7FFF" hex (or 32767 decimal)
Specifies the receive window size advertised by the TCP/IP stack. If you have a latent network you can try increasing the value to 93440, 186880, or 372300.

Exit your registry and restart Windows for the changes to take effect.

If you don’t want to edit the registry, here's a little TCP utility that is ideal...


http://www.broadbandreports.com/front/doctorping.zip

Mobile Secret Codes

Siemens Mobile Secret Codes:


C25:

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out (electrical connections)

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO


Languages:

*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish

How to change PIN:

**04*old PIN*new PIN*new PIN#

How to check simlock status

*#0606# and then press left soft-key, you will see strange characters, then text ("brak blokad"). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clicking on left key (you will see IMEI and software version).


S4:

Monitor Mode - how to activate:

Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode - press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.

How to see date of software:

Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to "normal" and then left soft-key, 56.

S6, S8:

If you add to phonebook under 'own phone number' +12022243121 with namez (for example MMI), then you will see something smile.gif

S10, E10:

In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.

S15e:

Monitor Mode:

Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800

Menu 10.1 MS info
Menu 10.2 Soft date
Menu 10.2.1 Software version.
Menu 10.2.2 EEProm version.
Menu 10.3 Tst and product info.
Menu 10.3.1 Handware data.
Menu 10.3.2 Date of manufacture
Menu 10.3.3 Service date
Menu 10.3.4 Date of repair.


S25:

Enhanced Full Rate
*#3370# turns on
#3370# turns off

Haft Rate Mode
*#4720# turns on
#4720# turns off.

Languages:

*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish

How to change PIN2?

**04*old PIN2*new PIN2*new PIN2#

What is my software version?

Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.

How to extend battery life:

IrDA - turn on only when you need.
Turn off automatic network search (6-3)Turn off Vibration alarm.

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button



S25, M35, S35, C35

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button






Secret Codes Of Nokia Mobiles:


Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.


1610/1630

*#170602112302# (software version)

1610/1611

IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: - # 9 2 7 0 2 6 8 9 #


2110

*#9999# (software version)

2110i/2110e

*#170602112302# or (depends on model)*#682371158412125# (software version)


NOKIA3110

*#06# -IMEI

*#3110# -Software version

##002# - allows to turn off voice mail.

*#7780# - restore factory settings

*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)

*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:

6232 (OK)displays month and year of production date (ie "0198")

7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")

7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")

9268 (OK) -displays serial number

37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !

87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)

* # 9 2 7 0 2 6 8 9 # -Simlock info

*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)

*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)

*#77# (call) -(work s only in some networks)

*#33/35# (call -displays message "Service not active".

**31# (call) -your no. will not be showed to others when you make a call



3210


*#06# -IMEI

*#0000# -software version

*#92702689# (or *#war0anty#)- enters service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.


#3370# -Turns off sound encoding system Enhanced Full Rate .

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

xx# -Replace xx with desired phonebook entry - press # and you will see it on display.


51XX


*#06# -IMEI

*#0000# - Software version

*#92702689#( or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

#pw+1234567890+1 -provider lock status

#pw+1234567890+2 -Network lock status

#pw+1234567890+3 -Provider lock status

#pw+1234567890+4 - SimCard lock status


NOKIA 61XX


*#06# -IMEI

*#0000# ;-*#99 99# (Nokia 6130)


*#92702689# (or *#war0anty#) Software versionEnter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.


NOKIA8810


*#06# - IMEI

*#0000# -Software version

*#92702689# (or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy

#4720# -Turns off battery save mode - saves about 30 % of energy



NOKIA99OO


*#06# -IMEI

*#682371158412125# -Software version

*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.



NOKIA 911O


*#06# IMEI


*#0000# SOFTWARE VERSION

*3370# Turns on sound encoding system - Enhanced Full Rate.

#3370# Turns off sound encoding system - Enhanced Full Rate.

*4720# Turns on battery save mode - saves about 30 % of energy.

#4720# Turns off battery save mode.



NOKIA 81XX


*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry - press # and you will see it on display

*#92702689# (or *#warOanty#)

"Warranty code:" - you have to enter one of the following codes:

9268 (OK) displays IMEI (International Mobile Equipment Identification)

6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)


7832 (OK) displays date of purchase

7332 (OK) displays date of repair or upgrade

37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!

87267 (OK) transmits user data/move data do service PC




Motorola Codes:



Motorola 920
---------------


Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.





Motorola 930
--------------


Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


Motorola 930

The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.





Motorola 6200
--------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

UK (Orange)
AU

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered left to right, keypad up, battery down

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector






Motorola 7500
-------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

IT (model: F16 HW: 5.2 SW: 2.1)


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs
Numbered right to left, keypad up, battery down looking

1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin




Motorola 8200
--------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector





Motorola 8400
-------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector





Motorola 8700
--------------



*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

AU, IT, SG, DE, ES, ZA

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.





Motorola CD 160
---------------



Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.





Motorola CD 520
----------------



Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.





Motorola d460
--------------



#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.





Motorola V3688
---------------



#06# for checking the IMEI (International Mobile Equipment Identity)

Enhanced Full Rate Codec (EFR):

To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK

NOTE: Nothing appears on Screen.





Ericsson Mobile Secret Codes:


T10

*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youŽll have to take your battery out to turn the phone on again. And this will not care about Phone lock!

A way to (un)lock your cell phone on to the network(subset):
1. Press <**<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work 'only' with the network

Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Message Report

When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

T18

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To access SIM-Locking menu of your phone, press: < * [CLR] <
Be careful or you may lock your phone.

Message Report

When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

T28

*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Message Report

When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.



388

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# to reset the phones menu-language to English.

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu...

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Access menu without Sim card ...

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and youŽll have to take your battery out to turn the phone on again.

GA628

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# to reset the phones menu-language to English.

*#103# then YES Time and date will be shown.

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Bat. level indicator when turned OFF

When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and youŽll have to take your battery out to turn the phone on again.

Alarm Clock Menu

Go to MissedCall Empty the list Press the -> key for a second or two The option Menu size turns up Choose 'yes' and go from there.

An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

Free phone calls using the GA628

This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...

Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

Another variant of the code

Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

Microsoft's Really Hidden Files, Reveled Hidden files

Microsoft's Really Hidden Files: A New Look At Forensics. (v2.5b)
By The Riddler
October 14, 2001 (v2.0 finished May 16, 2001; v1.0 finished June 11, 2000)

Written with Windows 9x in mind, but not limited to.

DISCLAIMER:

I will not be liable for any damage or lost information, whether due to
reader's error, or any other reason.

SUMMARY:

There are folders on your computer that Microsoft has tried hard to keep
secret. Within these folders you will find two major things: Microsoft
Internet Explorer has been logging all of the sites you have ever visited --
even after you've cleared your history, and Microsoft's Outlook Express has
been logging all of your e-mail correspondence -- even after you've erased
them from your Deleted Items bin. (This also includes all incoming and
outgoing file attachments.) And believe me, that's not even the half of it.

When I say these files are hidden well, I really mean it. If you don't have
any knowledge of DOS then don't plan on finding these files on your own. I
say this because these files/folders won't be displayed in Windows Explorer at
all -- only DOS. (Even after you have enabled Windows Explorer to "view all
files.") And to top it off, the only way to find them in DOS is if you knew
the exact location of them. Basically, what I'm saying is if you didn't know
the files existed then the chances of you running across them is slim to
slimmer.

It's interesting to note that Microsoft does not explain this behavior
adequately at all. Just try searching on microsoft.com.

FORWARD:

I know there are some people out there that are already aware of some of the
things I mention. I also know that most people are not. The purpose of this
tutorial is teach people what is really going on with Microsoft's products and
how to take control of their privacy again. This tutorial was written by me,
so if you see a mistake somewhere then it is my mistake, and I apologize.

Thanks for reading.

INDEX:

1) DEFINITIONS AND ACRONYMS
2) WHY YOU SHOULD ERASE THESE FILES
3) HOW TO ERASE THE FILES ASAP
3.1) If You Own Microsoft Internet Explorer
3.2) Clearing Your Registry
3.3) If You Own Outlook Express
3.4) Slack files
3.5) Keeping Microsoft's Products
4) STEP-BY-STEP GUIDE THROUGH YOUR HIDDEN FILES (For the savvy.)
5) A LOOK AT OUTLOOK
6) HOW MICROSOFT DOES IT
7) +S MEANS [S]ECRET NOT [S]YSTEM.
8) THE TRUTH ABOUT FIND FAST
8.1) Removing Find Fast
9) CONTACT INFORMATION AND PGP BLOCKS
9.1) Recommended reading
10) SPECIAL THANKS
11) REFERENCES

Coming Soon:

ù pstores.exe
ù Related Windows Tricks.
ù The NSA-Key.
ù Researching the [Microsoft Update] button.
ù Why the temp folders aren't intended to be temporary at all.
ù What's with Outlook Express's .dbx database files?
ù Win2k support.


1. DEFINITIONS AND ACRONYMS

Well, the best definition I have been able to come up with is the following:

I) A "really hidden" file/folder is one that cannot be seen in Windows
Explorer after enabling it to "view all files," and cannot be seen in MS-DOS
after receiving a proper directory listing from root.

a) There is at least one loophole to enabling Windows Explorer to see them.
B) There is at least one loophole to enabling MS-DOS to see them.

(Interesting to note that the "Find: Files or Folders" utility cannot even
search through one of these folders. It doesn't even exist on the [Browse]
menu.)

II) Distinguishes "really hidden" file/folders from just plain +h[idden] ones,
such as your "MSDOS.SYS" or "Sysbckup" folder.

III) Distinguishes from certain "other" intended hidden files, such as a file
with a name with high ascii characters (eg, "?ëïš?").

DOS = Disk Operating System
MSIE = Microsoft Internet Explorer
TIF = Temporary Internet Files (folder)
HD = Hard Drive
OS = Operating System


2. WHY SHOULD I ERASE THESE FILES?

Just from one of these files I would be able to tell you which web sites you
previously visited, what types of things you search for in search engines, and
probably gather your ethnicity, religion, and sexual preference. Needless to
say, one can build quite a profile on you from these files. It has the
potential to expose and humiliate -- putting your marriage, friendship, and
corporation at risk. Here's one good example of the forensic capabilities...

------------------------------------------------------------------------------

"I've been reading your article as I have a problem with an employee of mine.
He has been using the works pc for the internet and using it to chat and look
at porn sites. He was then deleting the cookies and history in order to cover
his tracks. A friend of mine pointed me in the direction of this site and
your article. I have found it to be incredibly useful,..."

--Concerned Boss, 8/24/01

------------------------------------------------------------------------------


3. HOW TO ERASE THE FILES ASAP

Step by step information on how to erase these files as soon as possible.
This section is recommended for the non-savvy. Further explanation can be
found in Section 4.0. Please note that following these next steps will erase
all your cache files and cookies files. If you use the offline content
feature with MSIE, it will remove this as well. It will not erase your
bookmarks.


3.1. IF YOU OWN A COPY OF MICROSOFT INTERNET EXPLORER

1) Shut your computer down, and turn it back on.
2) While your computer is booting keep pressing the [F8] key until you are
given an option screen.
3) Choose "Command Prompt Only" This will take you to real DOS mode. ME
users must use a bootdisk to get into real DOS mode.
4) When your computer is done booting, you will have a C:\> followed by a
blinking cursor. Type in this hitting enter after each line (sans
parenthesis):

C:\WINDOWS\SMARTDRV (Loads smartdrive to speed things up.)
CD\
DELTREE/Y TEMP (this line removes temporary files.)
CD WINDOWS
DELTREE/Y COOKIES (This line removes cookies.)
DELTREE/Y TEMP (This removes temporary files.)
DELTREE/Y HISTORY (This line removes your browsing history.)
DELTREE/Y TEMPOR~1

(If this last line doesn't work then type this:)

CD\WINDOWS\APPLIC~1
DELTREE/Y TEMPOR~1

(If this doesn't work then type this:)

CD\WINDOWS\LOCALS~1
DELTREE/Y TEMPOR~1

(If this still does not work, and you are sure you are using MSIE5.x, then
please e-mail me. Finding the location of these may be difficult and I'd
certainly like to know where else MSIE likes to hide its cache. I believe
older versions of MSIE keep them under "\windows\content\".)

This last one will take a ridiculous amount of time to process. The reason it
takes so incredibly long is because there is a ton of semi-useless cache
stored on your HD.


3.2. CLEARING YOUR REGISTRY

It was once believed that the registry is the central database of Windows that
stores and maintains the OS configuration information. Well, this is wrong.
Apparently it also maintains a bunch of other doo-dah that has absolutely
nothing to do with the configuration. I won't get into the other stuff, but
for one, your Typed URLs are stored in the registry.

HKEY_USERS/Default/Software/Microsoft/Internet Explorer/TypedURLs/
HKEY_CURRENT_USER/Software/Microsoft/Internet Explorer/TypedURLs/

These "Typed URLs" come from MSIE's autocomplete feature. It records all URLs
that you've typed in manually in order to save you some time filling out the
address field. By typing "ama" the autocomplete feature might bring up
"amazon.com" for you. Although, I find it annoying, some people prefer this
feature. One thing is for sure, however -- it's an obvious privacy risk. You
wouldn't want a guest to type "ama" and have it autocomplete
"amaturemudwrestlers.com" now would you?

You can clear your Typed URLs out of your registry by doing going to Tools >
Internet Options > Content > [AutoComplete] > and finally [Clear Forms] under
MSIE. If you do not like the AutoComplete feature then uncheck the
appropriate boxes here.


3.3. IF YOU HAVE OUTLOOK OR OUTLOOK EXPRESS INSTALLED

Microsoft's e-mail clients DO NOT delete your messages until a) you really
know how, and B) you go through the redundant process. And besides this,
there's the glaring e-mail virus problems (in which virtually all other e-mail
client's are immune to.) This, alone, should be enough to want to strangle
Slick Willy -- as I like to call him.

My suggestion?

1) Install another e-mail program like Eudora or Pegasus Mail. Make sure
everything is setup correctly. (www.eudora.com / www.pmail.com)
2) Backup any e-mail and address books that you wish to save by making use of
the export/import features.
3) Uninstall Outlook.

Warning: Simply uninstalling Outlook does not erase any of your e-mail
correspondence. The database files are still there on your hard drive. To
find them open up a DOS window and type this:

dir *.mbx /s/p
The files you are looking for are:

INBOX.MBX
OUTBOX.MBX
SENTIT~1.MBX
DELETE~1.MBX
DRAFTS.MBX

If these files come up they should be listed in either of these folders:

C:\Windows\Application Data\Microsoft\Outlook Express\Mail\
C:\Program Files\internet mail and news\%USER%\mail\

Now type either of the following (depending on the location of your .mbx
files...)

*Remember, this will erase all your e-mail correspondence so backup what you
want to keep. By now you should have already imported your mail into Eudora,
or Pegasus Mail.

CD\WINDOWS\APPLIC~1\MICROS~1\OUTLOO~1
DELTREE/Y MAIL

or

CD\PROGRA~1\INTERN~1\%USER%

(replace "%user%" with the proper name.)

DELTREE/Y MAIL

If you have newer versions of Outlook or Outlook Express the databases are
*.dbx, or *.pst files. Five times as creepy as the *.mbx files. I recommend
that you take a look at them yourself.)


3.4. SLACK FILES

As you may already know, deleting files only deletes the references to them.
They are in fact still sitting there on your HD and can still be recovered by
a very motivated person.

ù BCWipe is a nice program that will clear these files. (www.bcwipe.com).
ù For you DOS buffs, there's a freeware file wiper on simtel.net that I use.
(www.simtel.net/pub/dl/45631.shtml).
ù If you are using PGP then there is a "Freespace Wipe" option under PGPtools.
ù The latest version of Norton Utilities has a nice filewiping utility.
ù You might want to check out Evidence Eliminator's 30 day trial. This is
probably the best program as far as your privacy goes.
(www.evidence-eliminator.com)


3.5. KEEPING MICROSOFT'S PRODUCTS

If you insist on using Microsoft Internet Explorer then I strongly recommend
that you check out at least one of these programs:

ù PurgeIE (www.aandrc.com/purgeie)
ù Cache and Cookie Cleaner for IE (www.webroot.com/washie.htm)
ù Anonymizer Window Washer (www.anonymizer.com/anonwash)

Other programs that claim to clear your history don't seem to work, although
I haven't run any tests in a while.

And if you insist on using Outlook or Outlook Express then you should get in
the habit of compacting your mailboxes.

You can do this by going to File > Folder > Compact All if you have Outlook
Express.

or

Tools > Options > Other tab > [Auto Archive] if you have Outlook. Make sure
to set things up here.


4. STEP-BY-STEP GUIDE THROUGH YOUR HIDDEN FILES

This next section is for those of you who are more interested in learning the
ins and outs of your computer. This section is intended for the savvy user.

The most important files to be paying attention to are your "index.dat" files.
These are database files that reference your history, cache and cookies. The
first thing you should know is that the index.dat files is that they don't
exist in less you know they do. They second thing you should know about them
is that some will *not* get cleared after deleting your history and cache.

The result:

A log of your browsing history hidden away on your computer after you thought
you cleared it.

To view these files, follow these steps:

In MSIE 5.x, you can skip this first step by opening MSIE and going to Tools >
Internet Options > [Settings] > [View Files]. Now write down the names of
your alphanumeric folders on a peice of paper. If you can't see any
alphanumeric folder names then start with step 1 here:

1) First, drop to a DOS box and type this at prompt (in all lower-case) to
bring up Windows Explorer under the correct directory...

c:\windows\explorer /e,c:\windows\tempor~1\content.ie5\

You see all those alphanumeric names listed under "content.ie5?" (left-hand
side.) That's Microsoft's idea of making this project as hard as possible.
Actually, these are your alphanumeric folders that was created to keep your
cache. Write these names down on a peice of paper. (They should look
something like this: 6YQ2GSWF, QRM7KL3F, U7YHQKI4, 7YMZ516U, etc...) If you
click on any of the alphanumeric folders then nothing will be displayed. Not
because there aren't any files here, but because Windows Explorer has lied to
you. If you want to view the contents of these alphanumeric folders you will
have to do so in DOS. (Actually, this is not always true. *Sometimes*
Windows Explorer will display the contents of the alphanumeric folders -- but
mostly it won't. I can't explain this.)

2) Then you must restart in MS-DOS mode. (Start > Shutdown > Restart in
MS-DOS mode. ME users use a bootdisk.)

Note that you must restart to DOS because windows has locked down some of the
files and they can only be accessed in real DOS mode.

3) Type this in at prompt:

CD\WINDOWS\TEMPOR~1\CONTENT.IE5
CD %alphanumeric%
(replace the "%alphanumeric%" with the first name that you just wrote down.)

DIR/P

The cache files you are now looking at are directly responsible for the
mysterious erosion of HD space you may have been noticing. One thing
particularly interesting is the ability to view some your old e-mail if you
happen to have a hotmail account. (Oddly, I've only been able to retreive
hotmail e-mail, and not e-mail from my other web-based e-mail accounts. Send
me your experiences with this.) To see them for yourself you must first copy
them into another directory and then open them with your browser. Don't ask
me why this works.

A note about these files: These are your cache files that help speed up
your internet browsing. It is quite normal to use this cache system, as every
major browser does. On the other hand. It isn't normal for some cache files
to be left behined after you have instructed your browser to erase it.

5) Type this in:

CD\WINDOWS\TEMPOR~1\CONTENT.IE5
EDIT /75 INDEX.DAT

You will be brought to a blue screen with a bunch of binary.

6) Press and hold the [Page Down] button until you start seeing lists of URLs.
These are all the sites that you've ever visited as well as a brief
description of each. You'll notice it records everything you've searched for
in a search engine in plain text, in addition to the URL.

7) When you get done searching around you can go to File > Exit.

8) Next you'll probably want to erase these files by typing this:

C:\WINDOWS\SMARTDRV
CD\WINDOWS
DELTREE/Y TEMPOR~1

(replace "cd\windows" with the location of your TIF folder if different.)

This will take a seriously long time to process. Even with smartdrive loaded.

9) Then check out the contents of your History folder by typing this:

CD\WINDOWS\HISTORY\HISTORY.IE5
EDIT /75 INDEX.DAT

You will be brought to a blue screen with more binary.

10) Press and hold the [Page Down] button until you start seeing lists of URLS
again.

This is another database of the sites you've visited.

11) And if you're still with me type this:

CD\WINDOWS\HISTORY

12) If you see any mmXXXX.dat files here, then check them out (and delete
them.) Then...

CD\WINDOWS\HISTORY\HISTORY.IE5
CD MSHIST~1
EDIT /75 INDEX.DAT

More URLs from your internet history. Note, there are probably other mshist~x
folders here.

3) You can repeat these steps for every occurrence of a mshist~x folder.

4) By now you'll probably want to type in this:

CD\WINDOWS
DELTREE/Y HISTORY

This is about it as far as I know. You may also want to take a look at your
*.mbx files if you own Outlook. (dir *.mbx/s) All your e-mail correspondence
and file attachments are located within these database files. More detailed
information is covered in the next section.


5. A LOOK AT OUTLOOK EXPRESS

Would you think twice about what you said if you knew it was being recorded?
E-mail correspondence leaves a permanent record of everything you've said --
even after you've told Outlook Express to erase it. You are given a false
sense of security sense you've erased it twice, so surely it must be gone.
The first time Outlook simply moves it to your "Deleted Items" folder. The
second time you erase it Outlook simply "pretends" it is gone. The truth is
your messages are still being retained in the database files on your hard
drive. (Same with your e-mail attachments.)

For earlier versions of Outlook Express, they will be located in either of
the following folder:

c:\program files\internet mail and news\%user%\mail\*.mbx

(replace %user% with the name you use.)

or if your lucky, it will be located here:

c:\windows\application data\microsoft\outlook\mail\*.mbx

At this point you have two choices.

a) Get in the habit of compacting your folders all the time.
B) Import the data into another e-mail client such as Pegasus Mail or Eudora
and then delete the mbx files (and thus all your e-mail correspondence) by
typing this:

cd\windows\intern~1\%user%\mail
deltree/y mail

or

cd\windows\applic~1\micros~1\outloo~1\
deltree/y mail

*Typing in the above commands will kill all your e-mail correspondence. Do
not follow those steps in less you have already exported your e-mail and
address book!


6. HOW MICROSOFT DOES IT

TIP: Study this section if you would like to learn how to obscure your files
using Windows' own built-in mechanisms.

How does Microsoft make these folders/files invisible to DOS?

The only thing Microsoft had to do to make the folders/files invisible to a
directory listing is to set them +s[ystem]. That's it. As soon as the dir/s
command hits a system folder, it renders the command useless (unlike normal
folders.) A more detailed explanation is given in Section 7.

So how does Microsoft make these folders/files invisible to Windows Explorer?

The "desktop.ini" is a standard text file that can be added to any folder to
customize certain aspects of the folder's behavior. In these cases, Microsoft
utilized the desktop.ini file to make these files invisible. Invisible to
Windows Explorer and even to the "Find: Files or Folders" utility (so you
wouldn't be able to perform searches in these folders!) All that Microsoft
had to do was create a desktop.ini file with certain CLSID tags and the
folders would disappear like magic.

To show you exactly what's going on:

Found in the c:\windows\temporary internet files\desktop.ini and the
c:\windows\temporary internet files\content.ie5\desktop.ini contains this
text:

[.ShellClassInfo]
UICLSID={7BD29E00-76C1-11CF-9DD0-00A0C9034933}

Found in the c:\windows\history\desktop.ini and the
c:\windows\history\history.ie5\desktop.ini contains this text:

[.ShellClassInfo]
UICLSID={7BD29E00-76C1-11CF-9DD0-00A0C9034933}
CLSID={FF393560-C2A7-11CF-BFF4-444553540000}

The UICLSID line cloaks the folder in Windows Explorer. The CLSID line
disables the "Find" utility from searching through the folder. (Additionally,
it gives a folder the appearance of the "History" folder.)

To see for yourself, you can simply erase the desktop.ini files. You'll see
that it will instantly give Windows Explorer proper viewing functionality
again, and the "Find" utility proper searching capabilities again. Problem
solved right? Actually, no. As it turns out, the desktop.ini files get
reconstructed every single time you restart your computer. Nice one, Slick.

Luckily there is a workaround which will keep Windows from hiding these
folders. You can manually edit the desktop.ini's and remove everything except
for the "[.ShellClassInfo]" line. This will trick windows into thinking they
have still covered their tracks, and wininet won't think to reconstruct them.

I can't stress how rediculous it is that Windows actually makes sure the files
are hidden and in place on every single boot. No other files or folders get
this kind of special treatment. What's the agenda, here?


7. +S MEANS [S]ECRET NOT [S]YSTEM

Executing the "dir/a/s" command from root *should* be the correct command to
display all files in all subdirectories in DOS. However, doing so will not
display the index.dat files. This is because when DOS tries to get a list of
the subdirectories of any +s[ystem] folder it hits a brick wall. No files or
folders will be listed within any system folder. Not only does this defeat
the whole purpose of the "/s" switch in the first place, but I'd say it looks
like Microsoft took extra precautions to keep people from finding the files.
Remember. The only thing you need to do to obscure a file in DOS is to mark
the parent directory +s[ystem].

I was told by a few people that this was due to a very old DOS bug that dates
back many years. Fine. I can accept that. A bug it is.

But, would you consider your Temporary Internet Files to be "system files?"
It would seem that your TIF folder appears to be marked +s[ystem] for no good
reason at all. Just because. Same with your history folder. Just because.
You may not agree, but I tend to think that Microsoft marked the folders as
+s[ystem] solely to hide any directory recursal from DOS.

In case you didn't understand, here's a small experiment that will show you
what I mean...

Since the content.ie5 and history.ie5 subfolders are both located within a
+s[ystem] folder, we will run the experiment with them. The proper command to
locate them *should* be this:

CD\
DIR *.IE5 /as/s

The problem is that you will receive a "No files found" error message.

Since we already know there is a content.ie5 subfolder located here, why is
it giving me the "no files found" message?

But there is a way to get around this brick wall. That is, once you are
inside the system directory, then it no longer has an effect on the dir
listings. For example, if you enter the system folder first, and THEN try to
find any +s[ystem] directories you can see them just fine:

CD\WINDOWS\TEMPOR~1
DIR *.IE5 /as/s

1 folder(s) found.

Now you will get a "1 folder(s) found." message. (But only after you knew the
exact location.)

In other words, if you didn't know the files existed then finding them would
be almost impossible.

And, by the way. To see the "bug" in progress...

CD\
DIR *.IE5 /as/s

It will echo "no files found."

Now, just take away the system attributes from the parent directory...

CD\WINDOWS
ATTRIB -S TEMPOR~1

And retry the test...

CD\
DIR *.IE5 /as/s

It will echo "1 folder(s) found."


8. THE TRUTH ABOUT FIND FAST

Have you ever wondered what that "Find Fast" program was under your control
panel? Here's a hint: It has NOTHING to do with the "Find: Files or Folders"
utility located under the [Start] menu. Up until last month I honestly
thought it was completely useless, but it was finally adequately explained to
me...

------------------------------------------------------------------------------

"In any version of Word after 95, choose File Open and you'll get the Office
App Open dialog. Instead of just a space for the file name, there are text
boxes for file name, files of type, text or property & last modified. These
are search criteria you can use to find one or more files. There is also an
"Advanced" button that opens a dedicated search dialog with more options.
When you use either of these dialogs to perform a search, that search process
uses the indexes built by Find Fast."

--Oblivion

------------------------------------------------------------------------------

That sure answered a lot. Now instead of a "completely useless resource hog,"
I realize Find Fast actually does serve some purpose.

But what would you say if I told you that Find Fast was scanning every single
file on your hard drive? Did you know that in Office 95, the Find Fast
Indexer had an "exclusion list" comprised of .exe, .swp, .dll and other
extensions, but the feature was eliminated? If you were a programmer would
you program Find Fast to index every single file, or just the ones with Office
extensions?

FYI: If you have ever had problems with scandisk or defrag restarting due to
disk writes, it is because Find Fast was indexing your hard drive in the
background. It loads every time you start your computer up.

Now here is a good example of the lengths Microsoft has gone through to keep
people from finding out Find Fast is constantly scanning and indexing their
hard drives. (Always good to have an alibi.) Here's a snippet taken from
microsoft.com:

"When you specify the type of documents to index in the Create Index dialog
box, Find Fast includes the document types that are listed in the following
table.

Document type File name extension
------------- -------------------

MS Office and Web Documents All the Microsoft Excel, Microsoft
PowerPoint, Microsoft
Project, and Microsoft Word document types
listed in this table. Microsoft Binder
(.odb, .obt) and Microsoft Access (.mdb)
files. Note that in .mdb files, only
document properties are indexed.

Word documents .doc (document),
.dot (template), .ht* (Hypertext Markup
Language document), .txt (text file), .rtf
(Rich Text Format) files, Excel workbooks
.xl* files

PowerPoint .ppt (presentation), .pot (template), .pps
(auto-running presentation) files

Microsoft Project files .mpp, .mpw, .mpt, .mpx, .mpd files

All files *.* files"


Did you get that last part? "All files?" Find Fast indexes Office Documents,
Web documents, Word Documents, Power Point files, Project files, and (oh I
forgot) EVERY SINGLE other file on your computer.

Actually, the good news is that this isn't neccessarily true. In another
statement, Microsoft claims that if Find Fast deems the file "unreadable" then
the file will not be included in the index. For example, your command.com
probably wouldn't get indexed because it doesn't have a lot of plain text --
mostly binary.

But, back to the bad news. Every single file that has legible text is going
to be included in the Find Fast database. Do you understand the implication
here? Well, if you don't, then maybe you should check out those Find Fast
database files -- because acording to Microsoft, ALL TEXT SAVED TO YOUR HARD
DRIVE IS INDEXED. Do you see the forensic capabilities now? And don't forget
"all text" also means previously visited webpages from your cache. See for
yourself...

1) Open up a DOS window and type...
2) CD\
3) DIR FF*.* /AH (This will bring up a list of the find fast databases.)
4) EDIT /75 %ff% (insert %ff% with any of the names that were listed.)

Notice the incredible amount of disk accesses to your cache and history
folders? Why do we need two indexes?


8.1. REMOVING THE FIND FAST PROGRAM

You can remove Find Fast using your Office CD, but I recommend you do it
manually...

1) Reboot your computer in MS-DOS Mode.
2) Delete the findfast.cpl file from c:\windows\system\
3) Delete the shortcut (.lnk) under c:\windows\start menu\programs\startup\
4) Delete the findfast.exe file from c:\progra~1\micros~1\office\
5) Delete the find fast databases in your root, by typing this:

cd\
deltree ff*.*

6) You can also safely delete FFNT.exe, FFSetup.dll, FFService.dll, and
FFast_bb.dll if you have them.

Feel free to check out the ffastlog.txt (which is the Find Fast error log).
It's a +h[idden] file under c:\windows\system\.


9. CONTACT INFO AND PGP BLOCKS

This tutorial is being updated all the time. If you have any useful input, or
if you see a mistake somewhere, then please e-mail me so I can compile it into
future versions. You will be able to find the most recent version of this
tutorial at fuckmicrosoft.com

My e-mail address is located at the end of this note. Please let me know
where you heard about this tutorial in your message. If you have something
important to say to me, then please use encryption. My public key blocks are
located below.

Thanks for reading,

-- The Riddler
Contact: theriddler@fuckmicrosoft.com

My PGP 2.6.2 Block:

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2

mQCNAzu4wRAAAAEEAJnvaDDA9PydmZnnAmo80XZL57OycoCndppYyMv6CBMh+U35
NYtOxFfQiH8JhUN8uF3FgGBxckG0vBJ+RsYBIBXaP/JdxLX4qQnTsByyPEkoIomW
QCDfWXBMbFXxEKc1mrVTRmXpANpIjsj557qzW7dXxuvd5/E/bhviYkNfEe49AAUR
tAt0aGUgcmlkZGxlcg==
=B7ib
-----END PGP PUBLIC KEY BLOCK-----

My GPG 1.0.6 Block:

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.0.6 (MingW32)
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=pFTK
-----END PGP PUBLIC KEY BLOCK-----


9.1. RECOMMENDED READING

And if you aren't already paranoid enough here's some sites/articles that I
definitely recommend:

[URL=http://www.theregister.co.uk/content/4/18002.html]http://www.theregister.co.uk/content/4/18002.html[/URL]
[URL=http://www.findarticles.com/m0CGN/3741/55695355/p1/article.jhtml]http://www.findarticles.com/m0CGN/3741/556...1/article.jhtml[/URL]
[URL=http://www.mobtown.org/news/archive/msg00492.html]http://www.mobtown.org/news/archive/msg00492.html[/URL]
[URL=http://194.159.40.109/05069801.htm]http://194.159.40.109/05069801.htm[/URL]
[URL=http://www.yarbles.demon.co.uk/mssniff.html]http://www.yarbles.demon.co.uk/mssniff.html[/URL]
[URL=http://www.macintouch.com/o98security.html]http://www.macintouch.com/o98security.html[/URL]
[URL=http://www.theregister.co.uk/content/archive/3079.html]http://www.theregister.co.uk/content/archive/3079.html[/URL]
[URL=http://www.fsm.nl/ward/]http://www.fsm.nl/ward/[/URL]
[URL=http://slashdot.org]http://slashdot.org[/URL]
[URL=http://www.peacefire.org]http://www.peacefire.org[/URL]
[URL=http://stopcarnivore.org]http://stopcarnivore.org[/URL]
[URL=http://nomorefakenews.com]http://nomorefakenews.com[/URL]
[URL=http://grc.com/steve.htm#project-x]http://grc.com/steve.htm#project-x[/URL]


10. SPECIAL THANKS (and no thanks)

This version I want to give special thanks to Concerned Boss, Oblivion, and
the F-Prot virus scanner.

I also want to take this time to show my dissatisfaction to the New Zealand
Herald. Although partly flattering, it was more disgusting to see a
well-known newspaper try to take credit for my work.


11. REFERENCES

[URL=http://support.microsoft.com/support/kb/articles/Q137/1/13.asp]http://support.microsoft.com/support/kb/ar...s/Q137/1/13.asp[/URL]
[URL=http://support.microsoft.com/support/kb/articles/Q136/3/86.asp]http://support.microsoft.com/support/kb/ar...s/Q136/3/86.asp[/URL]
[URL=http://support.microsoft.com/support/kb/articles/Q169/5/31.ASP]http://support.microsoft.com/support/kb/ar...s/Q169/5/31.ASP[/URL]
[URL=http://support.microsoft.com/support/kb/articles/Q141/0/12.asp]http://support.microsoft.com/support/kb/ar...s/Q141/0/12.asp[/URL]
[URL=http://support.microsoft.com/support/kb/articles/Q205/2/89.ASP]http://support.microsoft.com/support/kb/ar...s/Q205/2/89.ASP[/URL]
[URL=http://support.microsoft.com/support/kb/articles/Q166/3/02.ASP]http://support.microsoft.com/support/kb/ar...s/Q166/3/02.ASP[/URL]
[URL=http://www.insecure.org/sploits/Internet.explorer.web.usage.logs.html]http://www.insecure.org/sploits/Internet.e...usage.logs.html[/URL]
[URL=http://www.parascope.com/cgi-bin/psforum.pl/topic=matrix&disc=514&mmark=all]http://www.parascope.com/cgi-bin/psforum.p...c=514&mmark=all[/URL]
[URL=http://www.hackers.com/bulletin/]http://www.hackers.com/bulletin/[/URL]
[URL=http://slashdot.org/articles/00/05/11/173257.shtml]http://slashdot.org/articles/00/05/11/173257.shtml[/URL]
[URL=http://peacefire.org]http://peacefire.org[/URL]

COPYRIGHT INFORMATION

This article has been under the protection of copyright laws the moment it was
fixed in a tangible form. In less otherwise agreed, this article may ony be
distributed as a whole and without modification. Thank you.